top of page
Jade Graphene UV 50ml 10H Ceramic Coating

Jade Graphene UV 50ml 10H Ceramic Coating

$89.99Price
Excluding Sales Tax

Jade Graphene UV 50ml 10H Ceramic Coating

 

With UV Reactivity for perfect inspection with a UV Light.

 

Jade Graphene UV is a graphene-oxide modified ceramic coating that protects substrates from weathering, chemicals, physical abrasion and UV rays while repelling water, dirt, and other contaminants via a strong self-cleaning effect.  Jade Graphene UV imparts an ultra hard, inert, durable coating that is several micron thick and produces a deep, reflective, mirror-like shine and highly slick surface.  Long lasting hydrophobic action.  To maintain the hydrophobic effect, use Graphene Spray Detailer after washing surface.

 

Directions:
Shake well before use. Saturate a suede applicator or similar with numerous drops of material from the dripper bottle. Apply the coating to a 3x3 ft² area of the vehicle using a cross-hatch pattern with slight overlap to level the product. Allow the coating to cure for 1-2 minutes and gently remove excess product using a clean suede cloth or low nap microfiber towel. Do NOT allow coating to come in contact with water for 24-48 hours while curing - if it does, remove water promptly. Apply additional coats with at least one hour between applications or immediately following a single pass 
around the vehicle. Do NOT apply in direct sunlight or to a hot surface. Cure time is dependant on environmental conditions - test product on a small inconspicuous area first to gauge cure time.

 

Up to 7 Years of Durability
Low Friction and Low Sliding Angle with High Contact Angle – Dynamic Hydrophobicity
Less Prone to Water Spots  and Stains from Bird Droppings and Decreases Penetration
Stronger, More Stable, Lower Energy Bonds Impart Higher Detergent Resistance
Increased Tensile Strength Improves Scratch & Mar Resistance at 10H
Easier Application

Less Tacky During Install

Rainbow Streaks & Sweats During Dwell

Communicates When to Wipe Off

More Immediately Slick Post Install
Higher Gloss with Higher Activity

Mirror-like Reflectivity
Lower Odor / Less Harsh

 

Low Profile Precision Foam applicator included!

 

PHYSICAL & CHEMICAL PROPERTIES

Physical State: Liquid
Appearance: Clear, Black
Odor: Characteristic
Flash Point: 49°C / 121°F
pH: N/A
Specific Gravity: 1.053 g/cm3
Density: 7.92 lbs/gal
Longevity: Up to 7 Years
Hardness: 10H (ASTM D-3363)
Contact Angle: 105-115° (Clear Coat)
Sliding Angle: 5-15° (Clear Coat)

Thickness: 3-4 micron
Adhesion: 5B – No Coating Loss (ASTM D-3359)
Mandrel Bend: No Coating Loss @ 180° (ASTM D-522)
Impact: 80/80 inch-lbs (ASTM D-2794)
Temperature Resistance: 1200-1800°C / 2200-3300°F

 

Active Ingredients: 

Octamethylcyclotetrasiloxane

Poly siloxazane

Distillates (petroleum), hydrotreated light

 

Jade Graphene Ceramic Coating Tech Sheet PDF