Jade Ice 50ML 7H Ceramic Coating

Jade Ice 50ML 7H Ceramic Coating

Video: How to apply Jade Ceramics

Click Here for Jade Ceramics Flyer

Semi-Permanent Coating

JADE CERAMIC COATING – ICE is a clear, nano crystalline coating that protects your vehicle from weather, chemicals, and UV rays while repelling water, dirt and other contaminants. Jade Ice applies a hard (7H), durable coating that is 2-3 micron thick and imparts a deep, reflective shine.
Preparation
Do I need to prepare the paint surface?
Highly recommended, yes. Any scratch or swirl or blemish existing on the paint that is then coated, becomes locked in and will remain visible, and protected.
It is advisable to sand out heavy scratches, polish out light scratches then polish out light swirls with our Puris compounds and Puris Polishes using a rotary or Dual Action (DA) machine for a flawless finish, then wipe clean with alcohol to ensure a grease free, dust free surface. Then apply the Jade ceramics.
 
Do I need to prepare the plastic/vinyl/rubber/trim or gel coat surface?
Simply ensure it is clean and dry.
 
Application
How are Jade ceramic coatings applied?
Jade coatings are applied via a lint free, suede wrapped, foam applicator, or similar. Run a bead of product on the block and apply in straight lines with 50% overlap onto areas approximately 3’ x 3’ (900mm x 900mm) or less at a time.
Once the product has had a few moments (1 to 5 minutes depending on the temperature) to volatilize, seen by a “rainbowing effect”, the excess material is gently removed using a low nap microfiber cloth and buffed to a high gloss.
Keep turning the microfiber towel while wiping down, until there are no streaks and the towel glides across the surface.
This process is repeated on each subsequent cross-section of the automobile until it is completely coated.
How long before I wipe down the Jade ceramic coating?
On average anywhere from 1 to 4 minutes depending on the ambient temperature, the colder it is the longer you leave it to set up and volatilize. The hotter it is the faster it will dry. As soon as it becomes tacky wipe it down.
How long until my vehicle can get wet or have water introduced to the surface?
It’s recommended to prevent water from coming into contact with the curing ceramic coating for the first 12-24 hours after being applied if air dried. If force cured you can wet immediately.
If within 24 hours water does find its way to the surface, it will not damage the coating, simply wipe it off with a microfiber cloth.
Why do you not want to apply Jade Ceramic Coatings in direct sunlight; won’t this only help the coating cure?
The active ingredients in the ceramic coating are held dormant by being contained in a volatile solvency, a lot of which is responsible for the method of application. If the surface for the coating to be applied to is too hot then the solvency will volatilize too quickly and the application will be deleteriously effected.
Can I apply two or more coats Jade Ceramic Coatings?
Yes, Jade Ceramic Coatings are designed to have the option for layering or stacking – this allows for even greater durability.
Simply allow for one hour of cure time between applications of additional coats. Wipe the previous coat down to flatten and repeat.
Maintenance
Do hydrophobic coatings fade with time, & why? Is there something wrong?
Over time, like typical topcoat, contaminants and pollutants will find a way to bind to the ceramic coating and will begin to affect the hydrophobic effect that is a hallmark of a ceramic coating. Simply using the Ceramic Detox Shampoo or a Puris cleaner will help remove the contaminants and return the coating back to its original, hydrophobic state.
Can I clay my vehicle after having a Jade Ceramic Coating applied?
While you could, it’s recommended not to clay a surface that has a ceramic coating applied as it may affect its durability.
Can I apply traditional waxes and sealants like paste wax over my Jade Ceramic Coating?
Yes, however waxes and sealants won’t have their typical levels of durability on a ceramic coating as the coating will try to shed the waxes and sealants instead of letting them bond.
Never apply ceramic coating over the top of a previous wax or sealant, ensure that the ceramic coating is applied directly to the prepared substrate or clear coat.
Can I apply Jade ceramics on fresh paint?
No, you should allow the paint to fully cure for one month to allow all solvents escape from the paint.
Can I apply Jade Ceramic Coatings over my film chip protector on the nose of the vehicle?
Yes, this will increase the longevity of the chip protector and help prevent it from discoloring.
How do I remove the Jade Ceramic Coating?
Jade ceramic coatings cannot be chemically stripped and require mechanical abrasion such as compounding with Pure Cut.
Do the Jade Ceramic Coatings delaminate, peel, flake or change color and yellow?
Jade Ceramic Coatings will never delaminate, crack, flake, peel or change color during the lifetime of the coating.
What is the shelf life & opening the Jade Ceramic Coating have?
Keep out of direct sunlight.
Typical shelf life for Jade Ceramic Coatings is two years. If the bottle has been opened and resealed, try to use the remainder of the ceramic material within three months of opening. The reason for this is that the ceramic coating reacts with moisture and if there is repeated exposure to atmosphere then the coating will begin to cure within the bottle – viscosity changes will be the best evidence of this.
 
Active Ingredients: 
Octamethylcyclotetrasiloxane
Poly siloxazane
Distillates (petroleum), hydrotreated light